Battery Packs & Chargers – 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters

Pleasant to be able to this weblog, It looks like you are searching for Battery Packs & Chargers. Right now I must show you the one product that you need to discover, it is 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters. When you acquire 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters merchandise, it’s essential to be familiar with the high quality. On this posting you will realize far more element on the subject of 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters. This 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters is about the best products with the Common Sense RC, and you can investigate the details with this weblog article.

The Detailed description from 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters

Get 40% more runtime for your Syma S107 or S107G! Has your Syma heli battery finally reached the end of its life? Don’t shelve it! This single cell 250mAh 30C upgrade lipo offers almost double the flight time of the stock battery!

Please Note: Some light soldering is required to install this battery.

1. Remove canopy from helicopter by removing screws on each side of the canopy.

2. Cut the red and then the black wire of the installed battery, leaving at least 1 inch of wire connected to the helicopter for splicing. Do not cut both wires at the same time, this can create a short circuit and damage the battery and the helicopter.

3. Match up the new battery’s wires to the wires on the heli, then solder them together. Alternately, you may simply twist the wire strands together if you do not wish to solder them. You may need to strip some of the insulation from the battery’s wires to accomplish this. Start by connecting the negative wires (black to black) and completely insulate that connection with electrical tape before moving on to do the same with the positive (red) wires. Leaving the battery’s black and red wires exposed at the same time may lead to an accidental short circuit and risk of fire.

4. Put battery in original position and push it towards the back or at an angle. Fit may be tight. Check the balance/center of gravity of helicopter and adjust battery position accordingly.

If you’d like to pay for this particular 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters, tend not to stop to be able to click SHOP FOR MOUSE underneath. In the event you nonetheless in the market for much more depth specifics of Elements and Expense characteristic from 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters, you need to mouse click THIS LINK .

Below undoubtedly are a few this illustrations or photos of 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters:

The 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters Price tag:

Check Up-to-date Price

Right after seeing many of the information on 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters previously mentioned, you believe this course as per ones own choices. To be able to find out more additional supplements, one can find various awesome supplements from Battery Packs & Chargers category with this web log, by using the search pack you can discover these quite simply. If you want to shop for that 4-Pack of Lectron Pro 3.7 volt – 250mAh 30C Lipo Packs for Syma S107 & S107G Helicopters, you just need to fast push BUY BUTTON less than this informative article.

Buy Now!

Buy Now

Related Products